Operation Manual

USB port
You can use the USB port in Server mode as a Samba server for filesharing in your home
network or in NetUSB mode as a virtual USB port on your computer. Please note that for NetUSB
mode you need the USB Port Control Center software installed on your computer.
Server name: Enter a name for the network share.
Workgroup: If you wish to add the share to your workgroup enter the workgroup name
here.
Description: Enter a desired description for the share.
Administrator: Enter a desired username for access to the share.
New Password: Enter the password for access to the share and confirm this password by
re-entering it in the Confirm password field
For netUSB make sure the radio button next to netUSB is selected and press Apply. Please see
Addendum A: USB Port Control Center for more information about netUSB.