Operation Manual

11 WiFi Settings
You can manually configure the WiFi settings of the Range Extender. The 2.4GHz and
5GHz network can both be configured separately. The settings for both frequencies are
similar, so only the 2.4GHz settings are shown here.
Basic
Band Please select the wireless band you wish to use. By selecting a
different band setting, you’ll be able to allow or deny the wireless
clients on a certain band.
MAIN ESSID Please input the ESSID (the name used to identify this wireless
access point) here. You can input up to 32 alphanumerical
characters. PLEASE NOTE THAT THE ESSID IS CASE SENSITIVE.
Channel Number Please select a channel number you wish to use. The channel
number must be same as the wireless access point you wish to
connect.
Associated Clients Click ‘Show Active Clients’ button and a new popup window will
appear which contains the information about all wireless clients
connected to this access point.
You can click the ‘Refresh’ button in the popup window to keep the
information up-to-date