User's Manual
Table Of Contents
HM30 User Manual V1.2
34
2021 SIYI Technology, All Rights Reserved
press the “Enter” button to switch.
2. Every time the “Enter” button is pressed, the AAT baud rate will be switched
between 57600 and 115200.
Mark
When the datalink output mode is UART, the configuration will not take effect.
When the datalink output mode is Bluetooth, Type-C, or UDP, the configuration will take
effect.
3.1.7 Fail-Safe
HM30 supports configuring Failsafe function with the remote controller.
1. Press “+” and “-” buttons to move the cursor to the second page of the “Settings”
menu.
2. Then go to “Set” after “FailsafeSet” and press the “Enter” button.