User's Manual

HM30 User Manual V1.2
56
2021 SIYI Technology, All Rights Reserved
6.1 Using SIYI IP Cameras
Open SIYI FPV app, with the well-connected HM30 system you can check video
display on your mobile device without any additional settings after powering on the
system.
6.2 Using Third-Party IP Cameras / Pods
Before connecting a third-party camera or pod to the HM30 air unit, please change
its IP address to “192.168.144.X”.
Mark
The “X” should not be “11”, “12”, or “20”, otherwise it won’t work. The three addresses
have been occupied by the HM30 ground unit, the HM30 air unit, and the UDP network.
Let’s take QGroundControl as an example.
1. In camera settings, check and copy the RTSP addresses from your IP camera /
pod.
2. In QGC, go to “General” page and slide to “Video Settings”.