User's Manual

Table Of Contents

HM30 User Manual V1.2

6.4.4 SIYI HDMI Converter and Third-Party IP Camera

Make sure that the IP camera use a different IP address from the HDMI converter

and connect them to the FPV Hub. Then open SIYI FPV app, input the IP addresses

in the bar and you will see two video streams.

6.4.5 Dual SIYI HDMI Converter

The sold-alone Air Unit HDMI Input Module is default to be HDMI Converter A, of

which the IP address is “192.168.144.25”. When you purchase another HDMI

converter for dual video streams, please make sure that you get the HDMI

Converter B (“192.168.144.26”).

Then, after connecting the two HDMI Converters in different IP addresses to the

FPV Hub and opening SIYI FPV app, you can see dual video streams when the

correct RTSP addresses are input in the IP address bars.

Mark

Dual video stream does not work when the two streams use the same IP address.

For more details about the IP addresses of the HM30 parts, please refer to the chapter 6.5 in

this manual.