Technical Specs

The wireless remote controller Manual（TX0301）

1. Main technical specifications:

Voltage: DC6V

Working Current: ≤3mA

Quiescent Current: <1.0uA

Transmission Frequency: 433.92±0.075MHZ

2. How to use: Press “Start” to switch on generator

Press “Stop” to switch off generator

3. Notes：

Do not let the wireless remote controller suffer violent vibration. Do not expose the

wireless remote controller to liquid or other moist environment.

Keep it away from direct sunshine. The wireless remote controller will twist under

heat.

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause

undesired operation.

FCC warning:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the

user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the IC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

 Consult the dealer or an experienced radio/TV technician for help.

PAGE 1
The wireless remote controller Manual（TX0301） 1. Main technical specifications: Voltage: DC6V Working Current: ≤3mA Quiescent Current: <1.0uA Transmission Frequency: 433.92±0.075MHZ 2. How to use: Press “Start” to switch on generator Press “Stop” to switch off generator 3. Notes： Do not let the wireless remote controller suffer violent vibration. Do not expose the wireless remote controller to liquid or other moist environment. Keep it away from direct sunshine.
PAGE 2
IC warning - English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. - French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.