294+21 56+6
251+13
Link the two "1L" with "1R" ,using "F1" screws to connect. Note:The larger hole is always covered over the small hole. Note:Please pay attention to the ground level when installing.
Link the "2L" with “1L",and link the "2R" with "1R" Install "3L" and "3R" as shown in the figure Link the "5" with “3L"and "3R"
First place part "P3" ,then place part "P4" then use screws "F1" and "F2" to connect Pay attention to the installation steps "I" and "II” 8 F2
8 F2 8 F2
8 F2 12
F2 8 8 F2 8 Raised area facing the down
Using "F1" screw to connect part "10L" and "10R” Using "F1" screws to pass through "P3" and "21L" "21R" to reach part "10L" "10R”
Using "F1" screws to pass through "P3" and "21L" "21R" to reach part "7" 9 2 Place part "8" into part “6",using "F1" screws to pass through part "6" to reach part"8"
72
Place part "16" into "21L" and “21R",then use screws "F2" to connect part "12" and part "16"
See product assembly step 21 Pay attention to the installation steps "I" and "II" and "III”
6 6 DOWN DOWN
DOWN DOWN
40 X4
41 X4