User Manual

9
REMOTE CONTROL OPERATING METHOD
Throttle Joystick
T
u
r
n
L
e
f
t
UP
DOWN
T
u
r
n
R
i
g
h
t
FLIGHT
Step 4: Connect APP
— Connect your smart phone to the WIFI of aircraft and check
the aircraft's status on the “SJ-F-PRO *** -BRG” APP.
Direction Joystick
F
o
r
w
a
r
d
Left
Right
B
a
c
k
w
a
r
d
— Power on the aircraft,"DE DE DE"sounds from the aircraft, now all the LED
lights keep blinking, then all LED lights turn to Red with slowly flashing.
— Put it on the level surface, the aircraft pairing automatcally, all the lights in
RED keep slowly flashing.
STEP 2: Power on the aircraft, then put it on the
level surface
Step 1: Power on the remote control
(Paring takes 40 seconds if the system started)
— Power on the remote control (Check the current
electric capacity first then power on the remote
control), “CONNECTING_” appeared on the
remore control LCD screen. "DI DI DI"sounds
indicates the remote control is under paring.
STEP 3: Remote control and Aircraft pairing frequency successfully.
— Remote control makes a "DI" sound, then “GPS MODE” appears on the LCD
screen, now the green (back) + white lights (front) slow-alternate flashing.
NOTE: Now you can connect the WIFI signal according to the APP instruction
or waiting for the GPS calibration completed.
Ensure the remote control antennas opened correctly
before operation. It takes about 40 seconds for the
aircraft to connect to the remote control.
ARODI