User Manual

1. Compass Calibration Part 1

— Push the joysticks into the 1 & 11 o’clock position.

— Green lights (Back) + White lights (Front) keep

blinking.

— App aircraft status: “Compass calibration”.

Step 5: Compass Calibration

Remark: The compass will be calibrated automatically when the magnetic

interference occur, it is not necessory to calibrate the compass by manually.

2. Compass Calibration Part 2

— Keeping the aircraft level, pick up the aircraft

from the back and rotate your body in one full

circle (360°), Remote control make a "DI"sound.

— All lights turn to solid green.

3. Compass Calibration Part 3

— From the bottom, hold the aircraft vertically and

camera is facing to the ground, rotating your

body in one full circle (360°). Remote control

make a "DI" sound.

— Front lights will turn to slowly flashing.

— App aircraft status: “Compass calibration okay”.

— Push the joysticks into the 11 & 1 o’clock

position.

— Lights rapid-blinking blue (back) and white

(front).

— App Drone Status: “Gyroscope is being

calibrated” “Gyroscope okay”.

NOTICE: Make sure the aircraft on a flat

surface to calibrate gyroscope.

Step 6: Reset to factory Setting/Calibrate

Gyroscope

Step 7: GPS Searching (DO NOT use GPS

Mode indoor)

— Set the aircraft back down to level surface.

— Lights return to slow-flashing green (back)

+ white (front) -- Means the aircraft is

searching the GPS signal.

— This process can take a few minutes.

— App aircraft status: “Waiting for GPS signal”.

Front

ARODI