User Manual

22
COMMON PROBLEMS AND SOLUTIONS
Drone lights flashing and
no response from the drone
when operating.
The blades spin, but the
drone cannot takeoff.
The quadcopter shakes
heavily.
Drone cannot stay balanced
in flight.
1. The blades distorted.
2. The motor doesn’t work
properly.
1. Insufficient battery power.
2. The blades distorted.
The blades distorted. Replace the blades.
1. Replace the blades.
2. Replace the motor.
1. Remote is not synced to
the drone.
2. Insufficient battery power.
1. Refer to the Quick Start guide
and re-sync the drone.
2. Recharge the battery.
1. Recharge the battery.
2. Replace the blades.
THE PROBLEM REASON COUNTERMEASURES
Blade A X2
Blade B X2
Instructions X1
Screw driver X1
Type-C cable X1
Only for charging
PARTS LIST (Included)
In order to make sure that it meets the requirement of the electromagnetic environment of the
aviation radio station, flying within the scope of 10 kilometers on each side by taking the airport
runway center line as the middle line is HIGHLY FORBIDDEN or flying within the scope of 20
kilometers by taking both ends of the runway as the center is HIGHLY FORBIDDEN. Flying on
the route of the airline is also PROHIBITED. Stop using all kinds of flying models or unmanned
Quad-rotors in the AREA that prohibited by related authority or department of our country.
ULTRAPORTABLE AND FOLDABLE
Screws for B Propeller
(Thread in WHITE)
X3
Screws for A Propeller
(Thread in BLUE)
X3
ARODI