User Manual

HOOK-AND-LOOP MOUNTING
In some vehicles, the dashboard may be
the best location to mount the detector.
For this mounting, use the supplied hook-
and-loop tape. Follow these steps to use
the hook-and-loop tape.
1. Use a damp cloth to thoroughly clean the bottom of the
stand and the dashboard. Let both surfaces dry.
Note: The tape’s adhesive might not stick to a surface
treated with vinyl cleaner or protectant.
2. Remove the tape’s paper backing and stick the tape to
the bottom of the detector.
Notes : On a curved dashboard, you might need to cut
the hook and loop tape in half and use one strip on each
side of bottom of the stand.
Remove the paper backing
from the other side of the tape
and press your detector onto the
dashboard.
11