User's Manual

CDMA REPEATER
(７) On changing set up value when the input range set by items is exceeded, warning
window appears to return to the earlier value.
< Fig. 22 > Input Range Excess Message
(８) After changing set up value, press Set button to transmit the changed data.
When set up is completed, the message appears.
< Fig. 23 > Set Up Completion Message
7.3 Monitor/Control of Web GUI State
You can select Mode Select at bottom of main screen of Web GUI as follows and monitor and
control the operation repeater.
< Fig. 24 > Mode Select
(１) As selecting Monitoring Mode, it monitors the present state of repeater system.
(２) As selection Control Mode, it stops Updating of repeater system and changes into
controllable Mode.
(３) The basic Mode after connecting is Monitoring Mode, and after controlling repeater on
Control Mode it automatically changes into Monitoring Mode.
(４) As for Monitoring Mode it is Polling period to update the state from system. It may input
between minimum 5 up to 60 seconds.