User's Manual

SMR-AI231

3 Installation Guide

SK Telesys is not responsible for product damage incurred during shipment. You

must make claims directly with the carrier. Inspect your shipment carefully for

obvious signs of damage. If the shipment appears damaged, retain the original

boxes and packing material for inspection by the carrier. Contact your carrier

immediately.

3.1

Pre-confirmation

This chapter explains how to install the Product and activate the service. After

following the procedures described in this chapter, you’re the product should be fully

functional. Product installation consists of the following steps.

1. Unpack the SMR-AI231 and Components check

2. Choose the best location

3. The Body-Mount-Bracket direction setting

4. Installation of the Wall-Mount-Bracket and Product

5. Connect the UTP cable

3.2

Unpack the SMR-AI231 and Components check

The following table is a list of components by each Product type. Unpack the

package of the Product and make sure you have all the elements shown below. And

then you can conduct the installation process. The following components can be

changed.

총무팀 / 사원 테스트용 / 10.1.10.134 / 2010- 02- 05 17:27 / 이 문서는 보안문서로서 외부 반출을 금합니다.