User's Manual

3.
Turn three 4Ø screws in a clockwise direction to fix the
4.
Refer to the figure below.
Figure
3.5 The Wall-
Mount
The Wall-Mount-B
racket should be installed tightly to the wall. In order to secure
the wall-mount-
bracket, you can use the enclosed four 5Ø screws.
1.
Indicate the position of drilling at the location of a
installation.
2.
Make a hole in the wall using a drill
3. Fix the Wall-
Mount
4.
Refer to the figure below
SMR
16
Turn three 4Ø screws in a clockwise direction to fix the
SM
R
Refer to the figure below.
Figure
3. The Body-Mount-Bracket change process
Mount
-Bracket Installation
racket should be installed tightly to the wall. In order to secure
bracket, you can use the enclosed four 5Ø screws.
Indicate the position of drilling at the location of a
W
Make a hole in the wall using a drill
Mount
-Bracket
in its position using an enclosed four 5Ø screws.
Refer to the figure below
SMR
-AI231
R
-AI231(ⓒ)
racket should be installed tightly to the wall. In order to secure
W
all-Mount-Bracket
in its position using an enclosed four 5Ø screws.
총무팀 / 사원 테스트용 / 10.1.10.134 / 2010- 02- 05 17:27 / 이 문서는 보안문서로서 외부 반출을 금합니다.
총무팀 / 사원 테스트용 / 10.1.10.134 / 2010- 02- 05 17:27 / 이 문서는 보안문서로서 외부 반출을 금합니다.