User's Manual

SMR-AI231

3.7

Power on the SMR-AI231

After mounting the product, you can turn on the switch on the top of the

SMR-AI231.

The status of LEDs should be checked with a power supply.

1. The PWR LED should have a green light on when the Product power is on.

2. Make sure the green light stays on after the RUN LED finishes blinking initially.

3. Make sure the green light comes on within 5 minutes after the STS LED has

flashed green. The STS LED will blink green when the GPS lock is on. When

the GPS lock is completed, the STS LED the green light will be on. If the GPS

lock time exceeds 5 minutes, you should replace the Product or check the

ASN-GW whether the operation is normal.

4. Contact the EMS manager to identify the status of the Product if all LEDs light

up all hope

5. Do call test by connecting to terminal if the status is displayed correctly on the

EMS

총무팀 / 사원 테스트용 / 10.1.10.134 / 2010- 02- 05 17:27 / 이 문서는 보안문서로서 외부 반출을 금합니다.