SK Telesys WiMAX Pico-BTS : User's Manual : Page 5

SMR-AI231

5

1 Introduction

This operating instructions manual provides all the information you need for

connection, setup and installation as well as important instructions for operation and

maintenance. Please read this information before putting the SMR-AI231 into

installation and operation and keep this operating instruction manual accessible in the

immediate vicinity of the product.

SMR-AI231 is to cover large building, campuses, hotel, hospital and enterprise

networks areas that support multiple antennas to minimize building penetration loss. It

also helps service carriers install or expand Mobile WiMAX Coverage more easily and

cost-effectively. This product requires a wire connection using UTP cable to connect

with the core network and an indoor or outdoor antenna for the air interface.

1.1 FCC compliance

SMR-AI231 is complies with Part 15 of the FCC Rules. This device may not cause

harmful interference and must accept any interference received, including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. Of this equipment does cause unacceptable interference to radio and

television reception, which can be determined by turning the equipment off and on the

user is encouraged to try to correct the interference by one or more of the following

총무팀 / 사원 테스트용 / 10.1.10.134 / 2010- 02- 05 17:27 / 이 문서는 보안문서로서 외부 반출을 금합니다.