Operating Manual
Table Of Contents
- Table of contents
- 1 Service and information address
- 2 Information for your safety
- 2.1 Residual risks
- 2.2 Minimum qualifications for machine operators, maintenance and service personnel
- 2.3 Regular maintenance of the device
- 2.4 Operating and maintenance work on device components of other manufacturers
- 2.5 Troubleshooting
- 2.6 Maintenance work on live device components
- 2.7 System modifications, add-ons and conversions
- 2.8 Protecting against electrostatic discharge
- 2.9 Exchanging device components
- 2.10 Revision mode / Revision operation (manual modification of function parameters)
- 2.11 Using cleaning and disinfection agents
- 2.12 Disposal and recycling
- 3 Device conformity
- 4 Scope of delivery
- 5 Transport and installation information
- 6 Device identification
- 7 Technical data
- 8 Information on device use
- 9 Layout
- 10 System overview
- 11 Operational concept
- 12 Commissioning
- 13 Battery pack charger / AC/DC adapter
- 14 Trolley
- 15 Network extender
- 16 Access control and user administration
- 17 Data display
- 18 Database for test parameters
- 19 Settings and configuration
- 20 Data storage
- 21 Start-up
- 22 Glove test using the WirelessGT
- 22.1 Preparation
- 22.2 Login
- 22.3 Test with "Auto start"
- 22.4 Test without "Auto start"
- 22.5 Stop test manually
- 22.6 Retest glove port
- 22.7 Finish test on the current glove port
- 22.8 Test list
- 22.9 Glove test in campaign
- 22.10 End of tests
- 22.11 Negative pressure device (option)
- 22.12 Print files
- 23 Data recovery
- 24 Exemplary process parameters
- 25 Messages
- 26 Cleaning and disinfection agents
- 27 Maintenance plan
- 28 Maintenance activities
- 29 Trouble shooting
- Index
Operating manual
WirelessGT
Glove tester
Document No._Version:
341174_D
CMS ID
14f8b65f920839adc0a8203200539573-13-en-GB
Print Date
29.04.2021
Document Status
released
Page No.
63 / 122
Revision Date
29.04.2021 / schwla1
21 Start-up
21.1 Start-up software
✓
Be sure that the installed operating system (on your notebook or PC) is at least Windows 7. The WirelessGT
software does not support Windows XP or Windows Vista!
✓ Be sure that you have administrator rights on your OS (notebook or PC)
✓
The USB-Stick (CONBEE II) is not inserted to an USB port at your OS.
✓ Windows security requires DOT.NET 4.5.2 installed.
1.
Close all applications.
2.
Windows should automatically find and install the correct driver for the CONBEE II USB Stick (If not con-
tact Skan support).
3.
Start application installation by double click execute file named "WirelessGT....msi" - icon on your
desktop.
4.
Follow installation instructions.
🡆 Installation is completed.
5.
Restart your OS.
6.
Default password: "wgt"
21.1.1 USB Radio module
1.
Check Zigbee USB driver by inserting of USB-Stick in a free USB-port.
🡆
The system responds with "new hardware detected"; "new hardware can be used" (depending on the
installed Windows software version).
2.
Start application by doubleclick on the new icon on your desktop named WirelessGT (green ring with
yellow glove).
🡆
The splash screen scanning of USB-port is visible.
USB-Stick is detected.
WirelessGT application is running.
Access to the first register named "Port 1-21" is free.
21.1.2
Network extender
1.
Attach extender to network.
2.
Login as administrator to WirelessGT software.
3.
Enable "Ethernet bridge support" and enter IP/Port address of network extender in the "Setup" screen
(ethernet communication).