Operating Manual

Operating manual
WirelessGT
Glove tester
Document No._Version:
341174_D
CMS ID
14f8b65f920839adc0a8203200539573-13-en-GB
Print Date
29.04.2021
Document Status
released
Page No.
8 / 122
Revision Date
29.04.2021 / schwla1
2 Information for your safety
2.1 Residual risks
The devices of Skan are designed, built and tested according to the latest state of the art, in compliance with
the applicable standards and regulations and offer high operational safety and reliability. Nevertheless,
improper transportation, assembly, operation, maintenance, disassembly and removal of the systems can pose
hazards for persons and property.
Warning and safety messages in the instruction handbook, as well as warning signs and instruction labels on
the system, informs about hazards that cannot be eliminated through design measures (residual risks).
1.
Read and observe the instruction handbook that is relevant to you and your job.
2.
For your safety, observe all safety messages and warnings in the instruction handbook specific for the
device.
3.
Observe all warning signs and instruction labels on the device.
2.2 Minimum qualifications for machine operators, maintenance and
service personnel
Errors during operation, maintenance and installation work can lead to unforeseeable hazards and risks.
The devices of Skan may only be operated, serviced and repaired by trained persons who have been
instructed in the operation and maintenance of Skan devices.
2.3
Regular maintenance of the device
The operational safety and reliability of the device depends on trouble-free functioning of all protective equip-
ment.
Perform maintenance work and inspections at the intervals specified in the maintenance plan.
2.4
Operating and maintenance work on device components of other
manufacturers
Components or devices may be built into the devices of Skan that are not constructed and marketed by Skan.
Information pertaining to safety as well as information on the operating, maintenance and service these compo-
nents can be found in the document at hand as well as in the original operating manuals of the component
manufacturer.
Also observe the original operating manual of the component manufacturers during operation and all
maintenance work.
2.5
Troubleshooting
Rectifying malfunction of the device can be dangerous. Improper rectifications of malfunctions of the device
(troubleshooting) can lead to impairment of the device functionality as well as unforeseeable hazards.
1.
Only conduct troubleshooting measures if you have the appropriate specialised knowledge.
2.
If you are unsure, please contact the Service department of Skan.