Manual

Downloading Data, Continued

Preparing the

unit.

Follow the steps in the table below to prepare the unit for data transmission.

Step Action

Select Playback or Review Data (depending on your instrument)

from the Main Menu on the unit.

Select Download.

Select To Dust Data Collector.

Press ENTER.

Result:

The Transmitting window appears.

Note:

Bars on the PC screen should increase as the unit

downloads.

5 When the transmission is complete...

• The To Dust Data Collector selection screen is displayed on

the units monitor. The unit may be shut off at this time.

• The downloaded data is displayed in the Project Folder on the

PC. (Figure 8).

Figure 8. Project File after data has been transmitted.