Manual

PowerFlex Battery Charging System
Small and lightweight, the SKC PowerFlex
®
is an advanced charging system
designed for optimal charging of NiCad and NiMH ba ery packs for most SKC
personal air sampling pumps. Ba eries for up to four diff erent pump models
(excluding EX and ATEX models and models with lithium-ion [Li-Ion] ba eries)
can be charged simultaneously on the fi ve-station PowerFlex.
Pump-specifi c cables are used to connect ba ery packs to the PowerFlex so that
only one charger is needed for most SKC personal sample pumps. PowerFlex fully
charges ba ery packs in 6 to 8.5 hours, and then automatically switches to a safe
pulse trickle charge. Each a ached ba ery pack runs through an independent
cycle. An LED at each port indicates ba ery charge status. Ba ery packs can be
charged a ached to or detached from the pump.
Performance Profi le*
Dimensions: 4.4 x 5.5 x 1.4 in (11.1 x 14 x 3.5 cm)
Weight: 1.1 lbs (0.5 kg)
Charging time
‡
: 6 to 8.5 hrs
Status LED: Steady Red = Charging
Steady Green = Trickle charge
Input voltage: 100-240 V
Intrinsic safety: Not intended for use in explosive or hazardous
locations
Approvals: Power supply is
for electrical safety and
is CE marked.
* For U.S.-produced pump models only. Not compatible with Ex or ATEX-approved models.
‡ Typical charging times vary with model, ba ery capacity, and level of discharge.
Operating Instructions
863 Valley View Road, Eighty Four, PA 15330 USA
Tel: [phone] Fax: [phone] e-mail: [e-mail]