QuickTake 30 Owner's manual

15
Continuous Run with Manual Stop
Run time accumulates only while the pump is running.
Continuous Run mode performs one sample from 1 to
999 minutes, then automatically resets to zero and counts
up to 999 again until the user manually stops the pump.
1. Press  or  to scroll to Cont. Press [
] to select it.
The pump will start and the LED will display cumulative run time up to
59 seconds in seconds, then switch to minutes. The timer will count up to
999 minutes, automatically reset to zero, and count up to 999 minutes again
until the user manually stops the pump.
2. Press [
] to place the pump in Hold when the desired sampling time has
elapsed. The LED will display cumulative run time and Hold alternately.
To continue the sample run: Press [
].
To terminate the sample and reset the pump: Press
 while in Hold.
Sample Reset (rSEt) will fl ash on the LED. Press [
].
User Options During Continuous Run Sampling
Viewing ba ery status
Press
. Display will automatically return to
cumulative run time a er fi ve seconds or press
 again.
Hold mode
Press [
] while the sample is running to
place the pump and timer in Hold. Hold and
cumulative run time will display alternately.
Press [
] while in Hold to continue the
sample run.
Terminating a sample and rese ing the pump
Press
 while in Hold. Sample Reset (rSEt) will
fl ash on the LED.
To terminate the sample and reset the pump: Press [
].
To continue the sample run: Press
 to return the display to Hold.
Press [].
Digital display:
Continuous Run
For Intermi ent Sampling, see Advanced Setup.