QuickTake 30 Owner's manual

23
Ordering Information
QuickTake 30 requires 3/8-inch ID tubing.
Cautions:
• Use only SKC-approved parts to ensure reliable performance. Failure to do so
voids any warranty.
• Failure to follow warnings and cautions voids any warranty.
Description Cat. No.
QuickTake 30 Sample Pump*
†
includes battery pack and cassette and
tubing adapters; requires Cat. No. 223-245 charger accessory below
228-9530C
QuickTake 30 Sample Pump*
†
and Charger includes pump with
battery pack, AC charger/adapter (100-240 V), cassette and tubing
adapters, and tubing
228-9530
QuickTake 30 Sample Pump,*
†
Rotameter, and Charger includes
pump with battery pack, AC charger/adapter (100-240 V), cassette and
tubing adapters, rotameter, and tubing
228-9530A
QuickTake 30 BioStage Pump*
†
Kit includes pump and charger as
described above, Standard BioStage Impactor, mounting bracket with
inlet adapter, calibration adapter, rotameter, and deluxe carry case
228-9530K
Replacement Parts
Replacement Inlet Filters, pk/50 P40021A
Stem Tubing Adapter, pk/2 P31239
Cassette Adapter P33100
Reducing Adapter for Tubing, 3/8 inch to 1/4 inch, pk/2 P31211
Replacement Battery Pack * P75689
Replacement Stack for QuickTake 30 P21266
Accessories
Charger/Adapter, 100-240 V
223-245
Defender Primary Standard Calibrator, 300 ml/min to 30 L/min,
includes lead-acid battery, multi-plug charger (100-240 V), DryCal
Pro Software, 39-inch (1-meter) serial cable, and leak test caps
717-510H
Sampling Wand, telescopes to 34 inches (0.9 meter) for ductwork and
hard-to-reach locations; includes 6 feet (1.8 meters) of tubing
228-9521
Mounting Bracket for BioStage Impactor includes inlet adapter 228-9531
Rotameter, 3 to 30 L/min 320-100
Tygon Tubing, 3/8-inch ID 10 feet
50 feet
225-1351
225-1352
* Pump contains Li-Ion ba ery and may be subject to special shipping regulations.
† Use in non-explosive environments only. Not UL Listed for intrinsic safety