User's Manual
Table Of Contents
- 1 Product description
- 2 Integration with SKF @ptitude Observer
- 3 Installation and commissioning
- 4 Maintenance functions
- 5 Product specifications
- 6 Electrical waste
- Appendix A Limited Warranty
PRODUCT SPECIFICATIONS
IMx-1 wireless sensor specifications
70 (84)
SKF Enlight Collect IMx-1 System
User Manual
Revision A
Notes:
WPAN IEEE 802.15.1: Bluetooth SIG certification is pending.
Proximity IEC 14443: NFC (Near Field Communication) certification is pending.
OTA: Over The Air device firmware updates
5.1.6 Certifications
Note that all certifications listed below are pending or to be confirmed.
Europe
• Radio Equipment Directive (RED) and CE certified (radio, EMC and
product safety)
o Radio testing according to:
▪ EN 300328 for IEEE 802.15.4 Sensor radio
▪ EN 300328 for Bluetooth Low Energy
▪ EN 300330 for NFC
▪ EN 62479
▪ EN62369-1 and 50364
o EMC testing according to:
▪ EN 301489-1
▪ EN 301489-3
▪ EN 301489-17
▪ 61000-6-4
▪ 61000-4.3
▪ 61000-4.2
o Safety requirements according to EN 61010-1
North America
• Radio testing according to:
o FCC 15.247 for IEEE 802.15.4 Sensor radio
o FCC 15.247for Bluetooth Low Energy
o FCC 15.207 for NFC
• EMC testing according to:
o FCC Part 15 Subpart B
FCC compliance statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.