User's Manual

INTEGRATION WITH SKF @PTITUDE OBSERVER
@ptitude Observer overview and prerequisites
22 (92)
SKF Enlight Collect IMx-1 System
User Manual
Revision C
Figure 7 Security roles – IMx-1 System access, user rights
2.1.3 Enlight Collect IMx-1 System global settings
The selection of engineering units for IMx-1 measurements and the detection
methods used, are global settings found under Database > Options > Enlight Collect
IMx-1 System Global Settings tab:
Figure 8 Enlight Collect IMx-1 System global settings
Engineering units for each of the four measurement types can be chosen and the
following alternatives are available:
• Acceleration: g or m/s^2
• Velocity: mm/s or ips
• Envelope: gE or m/s^2E
• Temperature: C or F
Whilst for Acceleration and Envelope measurements the sensor itself always
operates with a true peak-to-peak detection (True PtP), in @ptitude Observer the
detection can also be configured as half the true peak to peak value (True PtP/2). If