User's Manual

INTEGRATION WITH SKF @PTITUDE OBSERVER
IMx-1 system configuration
32 (92)
SKF Enlight Collect IMx-1 System
User Manual
Revision C
Being a certificate based authentication, be aware that selecting WPA2-Enterprise
will require additional configuration fields to be completed over and above those
shown in the WPA2-Personal example below. These include CA (Certificate
Authority) certificate, EAP (Extensible Authentication Protocol), user Identity etc.
Figure 17 Gateway properties – Network settings tab
The third tab is Server settings:
Figure 18 Gateway properties – Server settings tab
There address and port settings relate to the location of Monitor. In general, the
address can be entered using domain naming or IP addressing noting that if an IP
address is entered here for a system communicating across public networks, it
should be the external facing or public IP address for the Monitor server.
Note also that when using TLS and a trusted public Certificate Authority, the Monitor
address must match the DNS name used in the certificate. The connection must not