User's Manual

INSTALLATION AND COMMISSIONING
Relay node commissioning
50 (92)
SKF Enlight Collect IMx-1 System
User Manual
Revision C
3.4 Relay node commissioning
First, complete the pre-commissioning task in @ptitude Observer. Then the on-site
commissioning of the node mirrors closely the sensor commissioning process:
A. Launch the app. An earlier log in with network access is recommended.
B. Select ‘Scan Sensor’ function
a. Bring the device close to the sensor to use NFC to wake it up, out of
flight mode.
C. After a period for Bluetooth search the ID of the sensor will be displayed.
Select it to connect and display status and other sensor information.
D. To add it as a relay node:
a. Press ‘Add As Relay’.
b. Select from the list of available gateways and choose the appropriate
relay node. To aid the selection process, in the lists of gateways and
then relay nodes associated with a selected gateway, both device
name and location text will be visible.
c. Confirm selections by pressing ‘Commission’.
E. App shows confirmation of successful commissioning or error. After exiting
this screen, the app will instruct the commissioned relay node to activate its
mesh radio and attempt to connect. If the commissioning attempt was
unsuccessful then the process can be repeated by pressing ‘Try Again’.
F. Repeat steps B to E for all relay nodes being processed.
3.5 Generating a commissioning report
To generate a commissioning report, select ‘Report’ from the main menu. The data to
be included can be from one or more ‘work days’:
a) Select data for report
b) Commissioning report
Figure 30 Preparing and viewing a commissioning report