User's Manual

MAINTENANCE FUNCTIONS
Troubleshooting
SKF Enlight Collect IMx-1 System
User Manual
Revision C
71 (92)
o The Zadig main drop-down will list any devices not already having a
driver, so from it select the "Gadget Serial" device, refer Zadig screenshot
below.
o The Driver will be ‘(None)’ – meaning no current driver, in the adjacent
field use the up/down buttons to select USB Serial (CDC) as shown and
then press Install Driver.
Figure 48 Using Zadig utility to install the USB device driver
4.3.7.2 Ethernet LEDs
Although not visible externally, to aid fault finding, link and activity LEDs are available
on-board for the Ethernet interface.