User's Manual

PRODUCT SPECIFICATIONS
Quality control
86 (92)
SKF Enlight Collect IMx-1 System
User Manual
Revision C
5.3.2 Sensor
Figure 50 Sensor labelling
There is a flat area on one face of the sensor case where the SKF product marking is
placed. Below that is a small area that may be used by the customer to place their
own identification marking on the sensor, if this is required.
5.3.3 Gateway
On the front face of the case a manufacturing data label, Figure 51, confirms product
and company information, CE marking, WEEE marking and RoHS compliance. The
QR code contains the product information shown alongside it. Note the QR code can
be used to identify the gateway during commissioning.
Figure 51 Gateway labelling
A second label provides the additional radio equipment approval information and
warnings that are required to comply with those approvals.
5.4 Quality control
• SKF Sverige AB, Luleå and SKF (UK) Ltd, Livingston are ISO 9001:2015
certified.