Installation Instructions

Skid Guard Anti-slip Tape
Installation Instructions
- Testing of adhesive before installation is suggested.
- Surface temperature must be above 55°.
- Apply to smooth surface. Repair application area by filling
in any cracks and pits. Seal porous surfaces. DO NOT
apply over grout lines.
- Clean surface using industrial cleaner. Remove any oils,
dirt, and flaking paint.
- Flush surface to remove any soap residue.
- Allow ample dry time.
- Cut to size. Rounding corners is suggested.
- Peel off paper backing. Keeping fingers off adhesive.
- Position and Press in to place, pushing from the center out
to the edges to remove any air bubbles. For enhanced
bond use a rubber hand roller.
- Ready for immediate use.
- Surface can be cleaned using mild floor cleaner as
directed.
Sure-Foot Industries Corp.
20260 First Avenue Middleburg Hts., OH 44130
440/234-4446 • 800-522-6566 • FAX [phone]