User's Manual

2 Introduction, Safety Requirements, EMC
2.3 Safety Instructions
Page 8 © SKIDATA AG, Version 1.1
2.3.2.5 Training of Operating Personnel
 Configuration and maintenance of the DKZ x70 i Turnstile
Unit is restricted to personnel with proper training and experi-
ence.
2.3.2.6 Appropriate Use
The DKZ x70 i Turnstile Unit is intended exclusively for control-
ling passage through personnel access and exit points.
The unit can be operated either manually or automatically in
combination with a control device for verifying access authorisa-
tions. Skiers may pass through a Turnstile x70 i gate with their
skis on. At cableway lift facilities, skiers may carry their skis
through the gate.
Any other use of the turnstile gate is considered as being inap-
propriate. SKIDATA™ AG will under no circumstances assume
liability for any damage arising from such inappropriate use of the
turnstile unit.
2.3.2.7 Warranty and Liability
In the event of damage to person or property, all warranty and li-
ability claims shall be excluded, should this damage be attribut-
able to one or more of the following:
 Inappropriate use of the DKZ x70 i Turnstile Unit
 Improper installation of the turnstile or any part thereof
 inadequate or missing warning facilities and/or safety devices
inside the danger area around the DKZ x70 i Turnstile Unit
 Irregular or insufficient maintenance
 Use of material not approved by SKIDATA™
 Insufficient structural renovation
 Insufficient training of operating personnel
 Unauthorised constructional or technical modifications of the
DKZ x70 i Turnstile Unit, particularly modifications of the turn-
stile drum or its support fixture
 Disaster situations brought about by impact of foreign bodies
or acts of God.