User's Manual
Table Of Contents
- Cover
- 01 - Main table of Contents
- 02 - Introduction, Safety Requirements, EMV
- 03 - Maintenance
- Maintenance
- Contents
- Opening the Reader
- Reader cable connections
- Maintenance
- Maintenance
Maintenance 6
Opening the Reader 3.2
© SKIDATA AG, Version 1.0 Page 5
Reinstalling the reader mechanism assembly
Place the support rails of the reader mechanism assembly in
the guiding bracket.
Reconnect all cables, making sure that all cable feeds are in-
side the housing and none of the cables are pinched.
Press the locking pin inwards and push the reader assembly
into the enclosure as far as it will go.
Finally, re-fasten the locking screws.
Fig. 3
Locking pin