User's Manual

AS x70i DUO (all variants) 1

Reading device AS x70i DUO 1.3

1.3 Reading device AS x70i DUO

1.3.1 Replacing the reader mechanism assembly

Removing the reader mechanism assembly

 Using a 4 mm Allen wrench, unfasten and remove the fasten-

ing screw (Allen screw) at the rear of the reader.

 Press in the locking screw at the rear.

 Carefully tilt the top section towards the front, as indicated by

the arrow in the illustration below.

 Disconnect the cables leading into the interior of the casing

(cables for heater, signal light control, etc.).

 Remove the reader top section by lifting it up and taking it out

of its housing.

Fig. 3:

Replacing the reader top section