XP SKIL 1200/1205 1 28-05-2002 11:54 Pagina 2 1200 1205 600 W 600 W 2,75 kg 2,75 kg 76 mm 76 mm 457 mm 457 mm 130x76 mm 130x76 mm 200 m/min 130 - 200 m/min 2 3 2
XP SKIL 1200/1205 28-05-2002 11:54 Pagina 3 4 5 3
XP SKIL 1200/1205 28-05-2002 11:54 Pagina 4 6 7 8 9 4
XP SKIL 1200/1205 28-05-2002 11:54 Pagina 5 ● GB INTRODUCTION ● If for any reason the old plug is cut off the cord of this tool, it must be disposed of safely and not left unattended USE This tool is intended for dry sanding with high removal performance of wood, plastic, metal filler and painted surfaces ● TECHNICAL SPECIFICATIONS 1 SAFETY Read and save this instruction manual (pay special attention to the safety instructions at the back) ● Avoid damage that can be caused by screws, nails and oth
XP SKIL 1200/1205 ● ● 28-05-2002 11:54 Pagina 6 VariTronic speed control (1205) 7 - select belt speed with speed selection wheel H - information on belt speed setting can be obtained from the sticker positioned on the front end of the tool Holding and guiding the tool 8 - guide the tool parallel to the working surface ! do not apply pressure on the tool; let the sanding surface do the work for you - do not tilt the tool in order to avoid unwanted sanding marks - keep the ventilation slots uncovered SP
XP SKIL 1200/1205 GB 28-05-2002 11:54 Pagina 37 CE DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents: EN 50 144, EN 55 014, in accordance with the provisions of the directives 73/23/EEC, 89/336/EEC, 98/37/EEC. NOISE/VIBRATION Measured in accordance with EN 50 144 the sound pressure level of this tool is * dB(A) (1) and the vibration * m/s2 (2) (hand-arm method).
XP SKIL 1200/1205 GB 28-05-2002 11:54 Pagina 38 F SAFETY INSTRUCTIONS INSTRUCTIONS DE SECURITE When using electric tools, the following basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury. Read all these instructions before attempting to operate this product. Save these instructions.
XP SKIL 1200/1205 28-05-2002 11:54 Pagina 48 ACCESSORIES SKIL Nr.
