Use and Care Guide

" !%!!
Your tool is equipped with a dust port for dust
extraction. To use this feature, insert
standard 1-1/4" vacuum hose into the dust
port, and connect the opposite end of the
hose to a shop vacuum cleaner (Fig. 4).
-9-
FIG. 4
TAB
MICROFILTER
DUST CANISTER
FIG. 3
DUST PORT
DUST PORT
STANDARD 1-1/4
"
VACUUM HOSE
7,9(;05.5:;9<*;065:
! $!BC
"!!
Your tool can be turned “ON” or “OFF” by
squeezing or releasing the trigger. Your tool is
also equipped with “Lock-ON” button located
just above the trigger that allows continuous
operation without holding the trigger (Fig. 5).
!  $! BC Squeeze trigger,
depress button and release trigger.
!"! $! Squeeze trigger
and release it without depressing the “Lock-
ON” button.
If the “Lock-ON” button is
continuously being de-
pressed, the trigger cannot be released.
!
WARNING
ON/OFF
TRIGGER
“LOCK-ON”
BUTTON
FIG. 5
SM 2610019941 08-11:SM 2610019941 08-11.qxp 8/15/11 9:07 AM Page 9