SDS

SAMSUNG SDI Co., Ltd.
Date: January 1
st
2019 Revision no.: 01
MODEL INR18650-20R
Page 9 of 22
compounds (as
Ni))
0.015 mg/m
3
(soluble
compounds
(as Ni))
lithium carbonate
Not applicable
Not available
Not applicable
Not applicable
Not
applicable
1-Methyl-2-pyrrolidinone
Not applicable
Not available
Not applicable
Not applicable
TWA = 40
mg/m³,
TWA= 10
ppm, STEL =
80 mg/m³,
STEL = 20
ppm
8.2 Exposure controls
8.2.1 Appropriate engineering controls :
Substance/mixture related measures to prevent exposure during identified uses:
- Avoid charging batteries in areas where hydrogen gas accumulate.
- Use local exhaust ventilation to maintain concentrations of hydrogen below the Lower Explosive
collect and transport flammable gases in ventilation systems.
- Insure proper ventilation is present and electrolyte mist and vapours.
Structural measures to prevent exposure:
- Avoid charging batteries in areas where hydrogen gas accumulate.
- Use local exhaust ventilation to maintain concentrations of hydrogen below the Lower Explosive
collect and transport flammable gases in ventilation systems.
- Insure proper ventilation is present and electrolyte mist and vapours.
Organisational measures to prevent exposure: Not available
Technical measures to prevent exposure:
- Insure proper ventilation is present and electrolyte mist and vapours.
8.2.2 Individual protection measures, such as personal protective equipment :
Eye and face protection
- Wear ANSI approved safety glasses with side shield during normal use.
- Wear NIOSH approved face shield with safety glasses and H.V protection during intentional
disassembly.
Skin protection
Hand protection
- Wear nitrile butyl rubber, neoprene, or PVC glove during battery component disassembly.
- Discard contaminated work clothing after one work day.
Other skin protection
- Wear protective clothing during battery component disassembly.