Owner's Manual

Mount the Guard

WARNING

Always wear gloves when mounting or replacing the guard.

Be careful

of the blade on the guard and wear gloves to protect your hands from

being injured by the blade.

1. Remove the battery pack from the trimmer.

2. Lay the trimmer on the ground or the oor with the trimmer head facing upward.

3. Align the two bolts (supplied) with the two screw holes in the shaft (Fig. 4), and then

tighten them with the supplied wrench (Fig. 5).

Fig. 4

Fig. 5

Mount and Adjust the

Front-Assist Handle

1. Remove the battery pack from the trimmer.

2. Loose the wing nut and remove it with the

hex bolt from the front-assist handle

(Fig. 6).

Fig. 6

Wing Nut

Front-Assist Handle

Hex Bolt