Use and Care Guide

17
Accessories
* Blade
* Wrench.
* Adjustable rip fence
(*= standard equipment)
(**= optional accessories)
Extension Cords
If an extension cord is
necessary, a cord with
adequate size conductors that is capable
of carrying the current necessary for your
tool must be used. This will prevent exces-
sive voltage drop, loss of power or overheat-
ing. Grounded tools must use 3-wire exten-
sion cords that have 3-prong plugs and
receptacles.
RECOMMENDED SIZES OF EXTENSION
CORDS 120 VOLT ALTERNATING CUR-
RENT TOOLS
Tool’s
Ampere
Rating
Cord Size in A.W.G. Wire Sizes in mm
2
Cord length in feet Cord length in Meters
25 50 100 150 15 30 60 120
3-6 18 16 16 14 0.75 0.75 1.5 2.5
6-8 18 16 14 12 0.75 1.0 2.5 4.0
8-10 18 16 14 12 0.75 1.0 2.5 4.0
10-12 16 16 14 12 1.0 2.5 4.0 —
12-16 14 12 — — — — — —
NOTE: The smaller the gauge number, the
heavier the cord.
The use of any other accessories not specified in this manual may create a
hazard.
1619X09342.indb 17 12/16/15 8:28 AM