SIMPLY CLEVER www.skoda-auto.com Radio Bolero Owner's Manual Bolero: Yeti, Superb Rádio anglicky 11.2013 S00.5615.05.
Structure of this owner's manual (explanations) This owner's manual has been systematically designed to make it easy for you to search for and obtain the information you require. Chapters, table of contents and subject index The text of the Owner's Manual is divided into relatively short sections which are combined into easy-to-read chapters. The chapter you are reading at any particular moment is always specified on the bottom right of the page.
Parking and manoeuvring Table of Contents Visual parking system 20 General information Important information 2 Anti-theft protection 2 Device desrciption and operation 3 Device setup Tone settings 6 Settings main menu (Setup) 6 Setup radio 6 Traffic station set-ups 7 Setup Media 7 Setup system 7 Telephone set-ups 7 Radio Using the system 9 Media Using the system 12 External sources Using the system 15 Phone Using the system 17 Table of Contents 1
WARNING General information Concentrate fully on your driving at all times! As the driver you are wholly responsible for the operation of your vehicle. ■ Only use the device such that you are in full control of your vehicle in every traffic situation – do not run the risk of an accident. ■ Adjust the volume to ensure that audible signals from outside the vehicle, e.g. sirens from vehicles with right-of-way such as police cars, ambulances and fire engines, can be heard at all times.
As the device only functions after entering the safety code it cannot be used if stolen. This increases vehicle security. Note The code is normally stored in the instrument cluster. This ensures that it is automatically decoded (convenience coding). Manual input of the code is normally not necessary. Note The code is stored in the instrument cluster. This ensures that it is automatically decoded (convenience coding). Manual input of the code is normally not necessary.
1 - Setting up button for switching the equipment on and off (press) for volume control (turn) Menu knob › RADIO mode - turn for manual station adjustment; press briefly to start/stop scanning. › MEDIA mode - turn to change track; press briefly to start/stop scanning.
Tap briefly on the settings option you require. The pop-up window is closed and the setting you have selected is displayed. To close the pop-up window without changing the set-up, press the function button in the pop-up window . “Check box” A so-called “Check box” appears in front of a function which can only be switched on or off: A check mark in the check box indicates that the function is turned on, an empty check box means that it is turned off.
Screen - adjust the screen brightness, and select/deselect day/night display and confirmation tone by pressing the button. Device setup Telephone – Update the telephone book in the unit, delete all call lists and modify the assignment of the shortcut keys.
sensitivity in the opened pop-up window. If a MEDIA-IN multimedia input is also installed, this setting also applies to the audio sources that are connected to this input. Traffic station set-ups Call up the TIM setup menu by pressing button. SETUP and the Traffic information function › Tap on the left of the display of a TIM recording time to open the Setup of re- Setup system cording times menu .
Delete call lists › Tap the Delete call lists function button. › By confirming the following prompt with Delete , the numbers of all made and missed calls stored in the device are deleted. Change pre-assigned speed dial keys › Tap the Speed dial function button to edit the pre-assigned speed dial buttons. › In the sub-menu, tap the speed dial button you want to change. › Change the entry as described.
Searching for and storing radio stations Radio Manual search › Turn the menu button 2 or press the Man function button in the RADIOmain menu. The selected frequency range is displayed in a scale at the bottom of the screen. › Briefly press the menu button to exit the manual frequency selection and redisplay the function keys. Using the system Select radio station Call up main menu RADIO and choose frequency range › Press RADIO to call up the RADIO main menu.
RDS function Switching radio text on and off › In the RADIO main menu press the Extras button and then the Radio text function button. Instead of the six station buttons, a window now opens in the bottom half of the screen to display the radio text. › The window for displaying the radio text must fade out again to enable the station keys to be displayed again. Briefly tap in the display window of the radio text.
For example, if you drive to work every day at a certain time the vehicle, simply enter the approximate start time. The unit starts recording 90 minutes before the set start time and ends recording 30 minutes after it. You can then listen to the latest traffic reports before each journey and adjust your route to the current traffic situation. Note In case of a message of over four minutes long, the beginning is overwritten.
Media Using the system MEDIA main menu Calling up the main menu MEDIA and changing the media source › By pressing the button MEDIA the play function of the last played audio source will continue. If audio sources are currently available on the device you can use the selector button MEDIA to switch between the last audio sources. If a previously played media source is selected again, play will continue from the last played part.
CAUTION For playback in the internal drive, never use CDs marked “Do not insert in drives without a drawer” or Eco Disc. ■ After pressing the / icon there is a time delay of a few seconds before the CD is ejected. During this time the lock in front of the CD slot is open. ■ Be sure to wait until the CD has been fully ejected before you try to insert a new CD. You might otherwise damage the drive inside the unit.
Mix Scan - Random play function; the tracks will be played in a random order. General information for MP3 operation – Scroll through the CD. The first 10 seconds of each title are played. Requirements for the MP3 data and data carrier › CD-ROM, CD-R, CD-RW with a capacity of 650 MB and 700 MB.
External sources Adjust the play function volume of the external audio source The playback volume of the external audio source can be adjusted via the volume control on the device. Using the system Depending on the connected audio source, the output volume on the external audio source can be changed. Notes and instructions for handling external sources It is possible to play back external audio sources in the vehicle via the device.
› Activate the AUX-IN jack by pressing the tion button AUX MEDIA button followed by the selec- . Playback starts automatically after connecting the source. External audio sources connected via the AUX-IN input cannot be controlled via your radio. MDI input - multimedia input The input for external MDI audio sources is located under the front armrest in the storage compartment of the front passenger side or in the storage compartment of the centre console (according to vehicle model).
Enter call number Phone Enter a number and select › In the TELEPHONE main menu tap the [:::] function button to open the keypad to enter a phone number. › Tap on the number button to accept the corresponding number in the entry line. › Delete the characters in the entry line from left to right by pressing the function button . › Tap the function button when the desired number is displayed in the entry line. The connection to the entered call number is established.
› In the opened pop-up window, tap the call list from which you want to select a Search for an entry in the telephone book phone number. The corresponding list is displayed. Phone numbers for which there is an entry in the phonebook are displayed with the appropriate name. › In the Phonebook menu press the Search function button to seach for a phonebook entry. The function button can be used to display further information about the stored number.
The assignment of the shortcut keys remains stored in the unit and will only be displayed again when the corresponding SIM card is connected again to the mobile phone preparation program. Carrying out an additional phone conversation during a phone conversation to put the current conversation on “hold” as described above. › Select a new call number or select a stored call number. › If you are holding an additional conversation, you can switch between both parties (“alternate”).
Parking and manoeuvring Visual parking system Fig. 2 Display example of the device screen Your device assists the driver via the display screen when parking and manoeuvring. For more information on parking assist see » Owner's Manual, chapter Parking Assist. Explanation of graphic A B C D E F 20 An obstacle detected in the collision area. Do not continue to drive! An area without any obstacles or a free space between the bumper and an obstacle. An obstacle detected outside the collision area thus far.
ŠKODA AUTO a.s. pursues a policy of constant product and model development. We trust that you will understand that changes to models in terms of shape, equipment and engineering, may be introduced at any time. The information about appearance, performances, dimensions, weights, standards and functions of the vehicle is correct at the time of publication. Some equipment might only be introduced at a later date, or might only be offered in certain markets; information is provided by ŠKODA Partners.
SIMPLY CLEVER www.skoda-auto.com Radio Bolero Owner's Manual Bolero: Yeti, Superb Rádio anglicky 11.2013 S00.5615.05.
