Operation Manual

TV Tuner * 57
2nd possibility:
– Turn the menu knob to the right (or left), in order to set the
next (or the previous) channel.
For information the station and the belonging channel is indicated.
Store station
The six TV stations can be stored on the station buttons -
.
– Set the desired station with the button or the menu knob
.
– If the desired station has to be displayed, the desired station
button - must be pressed until there is a brief muting and
a signal tone cancels the storing.
You only have to touch the corresponding station button to call up the
stored station. The TV station belonging to it appears as long as it is in
its reception range.
Call up operator menu
TV operator menu:
• SCREEN - calls up a sub-menu, in which the brightness, contrast and
colour can be set.
• TELETEXT - here the video text pages can be called up.
• VIDEOSOURCE - switches from TV mode to video and vice versa.
• SETTINGS - calls up a sub-menu, in which the TV standard (video) is
selected.
Set screen
– Confirm the menu point “SCREEN” in the operator menu by
pressing the menu knob . Following settings are possible:
Brightness, contrast, colour.
– To change to the setting mode press again the menu knob .
Instead of the previous symbol appears an arrow
, the entry
is highlighted in colour.
– Select the desired value.
– Press the button , in order to take over the setting and
to exit the menu.
Select Autosearch
If the Autosearch function is activated, the TV tuner always tries
to establish the best frequency of the selected TV station.
– Press the menu knob . The operator menu is indicated in
the TV picture.
– Select and confirm the menu point “SETTINGS”.
– Select the menu point “AutoSearch” and press the menu
knob . The AutoSearch function is switched on (or switched
off).
A
18
1 6
A
12
A
2
A
18
1 6
A
18
A
18

A
9
A
18
A
18
20
.
book
Page
57
Tuesday
,
December
6
,
2005
2:26
PM