Operation Manual
- Sound settings
Function keys
›
Save and select radio stations
›
Enter code
AUX input - Attach an external audio source
Switching the unit on and off
›
To switch the device on and off, press setting button
1
.
After switching on the unit, the last audio source that was active before switch-
ing off will be played.
If the vehicle key is pulled out of the ignition lock while the unit is switched on,
the device will switch off automatically.
When the ignition is switched off, the system switches off automatically after ap-
prox. half an hour (discharge protection of the vehicle battery).
Volume setting
›
To increase the volume, turn button
1
clockwise.
›
To decrease the volume, turn button
1
counter-clockwise.
The change to the volume appears in the unit display.
If the volume is reduced to 0, the speakers are muted. The following symbol will
appear in the display
.
CAUTION
High volumes can cause hearing damage.
Sound settings
By pressing the button again
select the setting desired.
■
TRE - Treble setting
■
BAS - Bass setting
■
BAL - setting of the volume ratio between the left and the right side
■
FAD - setting of the volume ratio between the front and the rear
10
11
12
MENU mode
SCN (scan) function
Press menu button
2
or the
MENU
button and then the function button SCN .
The auto-play function starts and plays each station in the current frequency
band for about five seconds.
Press the menu button
2
or the function button SCN again to stop automatic
playing of the radio station you are currently listening to.
Function AS
Press the
MENU
button and then the function button AS .
An automatic station finding is started during which the 6 stations with the
strongest signal in the memory level FM1 and/or AM1 are stored. AM1 nebo DA1.
UPD function
Press the
MENU
button and then the function button UPD
This starts an automatic update of the radio station and the stations with the
strongest signal are re-stored at the FM1, AM1 or DA1 storage levels.
Setting special functions
Press the
MENU
button and then the function button SET .
■
SKM (SEEK MODE) - automatic station finding
■
ALL - stops the station finding at all available stations
■
PRESET - stops the station finding only at the stored stations
■
VOL - adjusts the volume when the device is turned on
■
GALA - speed-sensitive volume adjustment
■
DIS - sets the display backlight
■
PHONE - outputs telephone calls via the onboard loudspeakers
■
PDC - sets the reduction of the volume when the park distance control is active
■
PDC VOL ATTENU 0 - no volume limit
■
PDC VOL ATTENU 1 - medium level volume limit
4
General information