Operation Manual

Menu Telephone » page 31
Target-oriented traffic information (TMC) (applies to Amundsen)
» page 58
Media Command menu » page 29
Menu SmartLink » page 41
When connecting a supported external device instead of the symbol

the actual connection is shown instead of a symbol
▶

-
Android Auto » page 42
▶

-
Apple CarPlay » page 43
▶

-
MirrorLink® » page 43
Adjusting the volume
Every change in volume is displayed on the screen.
›
To
increase the volume, turn the controller

clockwise.
›
To reduce volume, turn the controller

anticlockwise.
›
To mute, turn the controller

to the left to 0.
›
or: Press the key

(applies to Bolero in the Yeti model ).
The following symbol appears in the display when the sound is muted:

.
If, at the time of muting, sound is played from the source in the media menu,
then the playback is interrupted (pause)
1)
.
CAUTION
■
High volumes can cause sound resonance in the vehicle.
■
When changing or connecting an audio source, this may cause sudden
changes in volume. Reduce the volume before changing or connecting an au-
dio source.




Device operation and settings
Device operation
Operating principles
Fig. 10 Screen area / screen display
Fig. 11
Using the menus
Description of the display » Fig. 10
Status line with time and outdoor temperature data and other information
Information and the operation of the current menu
Function surfaces of the current menu
Identification of the current menu
Return to the higher-level menu

A
B
C
D
E
1)
Does not apply to AUX.
11
Device operation and settings