Operation Manual

Automatic playback stop and disconnection
If an Apple device is connected as a Bluetooth
®
player, and this is connected to
the USB input, then the Bluetooth
®
connection is not dropped. If playback is
cancelled, playback must be started again. Only if USB is selected as the audio
source will the Apple device disconnect as a Bluetooth
®
player. In this regard,
an appropriate warning message appears on the device screen.
If the USB audio source is an Apple device, this unit cannot be connected as a
Bluetooth
®
player. In this regard, an appropriate warning message appears on
the device screen.
If the Bluetooth
®
player audio source is connected to the AUX input, then the
audio output is switched from the AUX input of the external connected device.
For further playback the audio source is to be switched to AUX.
Replace the Bluetooth
®
player
If you would like to replace a Bluetooth
®
Player which is connected to the ma-
chine as a phone at the same time, , then a relevant information message ap-
pears in the device screen.
End the connection to the currently connected Bluetooth
®
player and repeat
the pairing procedure » page 33, Managing paired external devices.
CAUTION
If an external device is connected to the device using Apple CarPlay
orAndroid Auto
, then it cannot be connected using Bluetooth
®
.
WLAN
Applies to Amundsen (Does not apply to Yeti).
The device allows you to play audio files from one of the external devices con-
nected to the device WLAN.
connect an external device that supports the DLNA (Digital Living Network
Alliance), with the device WLAN» page 39.
If necessary use the UPnP application (Universal Plug and Play) in the con-
nected device, which allows playback to start.
Select the audio source
Select WLAN.
Supported audio sources and file formats
Supported audio sources
Source Interface Type Specification
File sys-
tem
SD card SD reader Standard size SD, SDHC, SDXC
FAT16
FAT32
exFAT
NTFS
USB-
devices
USB 1.x; 2.x
and 3.x or
higher with
support of
USB 2.x
MSC
USB stick;
HDD (without any
special software);
The MSC mode
supports USB de-
vices
MTP
Devices with the
Android operat-
ing system or
Windows mobile
(mobile phone,
tablet)
Apple
Devices with the
iOS operating
system (iPhone,
iPod, iPad)
26
Media