Operation Manual

Select a message.
The message content and the following menu is displayed.
The text can be read out by the device's generated voice
Display a menu with additional options
Reply with template
- Reply using a template
Display numbers
- Recognition of telephone numbers in the message in-
cluding the contact number (recognized numbers can be dialled directly
or edited before dialling, or may be sent to this message)
Forwarding a message with the option to edit the message before sending
Reply to the sender via a message
Hotspot (WLAN) and data connection
Hotspot (WLAN)
Introduction to the subject
Applies to Amundsen (does not apply to Yeti).
WLAN can be used to connect to the Internet, to playback audio files in the
menu media or for operating the device using an application in the external
device (e.g. ŠKODA Media Command).
The requirement for the WLAN function is the ignition is switched on. After
switching on the ignition, the last-used WLAN connection appears.
It is possible to connect up to 8 external devices on the device hotspot and at
the same time to connect the device to the Hotspot of other external devices.
connect an external device to the hotspot (WLAN) of the device
Device hotspot on / off
Press the

button, then tap on the function surface
Tap on
WLAN
Mobile hotspot
Mobile hotspot
.
Set device hotspot
Press the

button, then tap on the function surface
Tap on
WLAN
Mobile hotspot
Hotspot (WLAN) settings
.
Setting required menu items the following menu.
Security level:
- Setting the connection security
Network key
- Entering the access password
SSID: ...
- Name of the device hotspots
Do not send network name (SSID)
-Turn WLAN hotspot visibility on/off
Tap the functional surface
Save
to save the parameters of the devices hot-
spot.
Connect
Enable the Wi-Fi in the external device and search for any available hotspots
Select the device hotspot (if necessary enter the required password).
Confirm the connection establishment.
39
Hotspot (WLAN) and data connection