Operation Manual

Disconnection (appears with active connections)
Settings for the menu SmartLink » page 42
Connection set-up
▶
Connect the external device via a connecting cable to the USB input » Own-
er's Manual.
▶
In the main menu SmartLink Choose the connected external device and the
type of communication system if necessary» Fig. 43 -

.
Return to the main menu of the active connection from another device menu
(E.g. From the Radiomenu)
▶
Press the button

→ active connection (

/

/

).
Disconnection
▶
To end the connection, in the main menu SmartLink the functional surface

Tap on» Fig. 43-

.
▶
orDisconnect the device from the USB input.
If the connection was ended by pressing the function surface

From the main
menu SmartLink the connection needs to be re-established when the external
device is connected again.
If the connection was terminated by disconnecting the cable from the USB
port, then the last active connection is shown in the main menu when the ex-
ternal device is reconnected.
Settings
›
In the SmartLink main menu, tap on the function surface

surface.
■
Activate data transfer for ŠKODA apps - turn on/off the data transfer for the con-
nected device for ŠKODA applications
■
MirrorLink® - Settings of the communication system MirrorLink
®
■
Screen orientation - Setting the screen display
■
Landscape - Width display
■
Portrait - Height display
■
Turned 180 degrees - Turn on / off the 180 ° inversion
■
Allow MirrorLink® Notes display - Turn on / off the display of messages of Mirror
link
®
applications in the device screen


Android Auto
™
Introduction to the subject
The Android Auto
™
connection can be set up under the following conditions.
The ignition is switched on.
The unit is switched on.
The external device to be connected is switched on.
Some applications require the data connection in the connected external de-
vice to be turned on.
If the device is connected to an external device via Android Auto
™
then all the
phones currently connected, as well as the Bluetooth
®
Players are disconnec-
ted. The external device to be connected will automatically establish a new
connection via Bluetooth
®
as a main phone. Connecting an additional tele-
phone is not possible over the duration of the connection.
An external device connected using Android Auto
™
cannot be used as an audio
source in the menu Media.
If route guidance is taking place at this moment in the device, then there is
the option to start the route guidance in the Android Auto
™
application. This is
also true reciprocally.
A list of devices and applications that the Android Auto
™
connection supports
can be found on the
™
Google website. Functionality is not guaranteed outside
of the supported regions.
Main menu
Fig. 44
Android Auto™: Main menu




42
SmartLink