Operation Manual

The ignition is switched on.
The unit is switched on.
The external device to be connected is switched on.
Some applications require the data connection in the connected external de-
vice to be turned on.
If you want to use the menu Telephone, then before establishing the
MirrorLink
®
connection with the telephone then connect the device first via
Bluetooth
®
.
An external device connected using MirrorLink
®
cannot be used as an audio
source in the menu Media.
If route guidance is taking place at this moment using the device, then this is
not terminated by starting the route guidance in the MirrorLink
®
- application.
Read in the QR code» Fig. 46using the respective application on your external
device (e.g. Telephone, tablet) orenter the following address in the web
browser to open the website with supported Mirrorlink
®
applications.
http://go.skoda.eu/connectivity
Main menu
Fig. 47
MirrorLink®: Main menu
Main menu - functional surfaces and information
Return toSmartLink Main menu
Displays a list of running applications with the ability to terminate them
Display the application last shown (as long as the application is running)/
show the display content of the connected external device
Settings of the SmartLink function » page 42
List of applications







A
Other pages with applications (by performing a finger movement sideways
across the screen, other pages with applications are displayed)
Application is not certified for use while driving
Operation
Fig. 48
Example of a running application
Start the application
▶
In the main menu of Mirrorlink
®
connection select the desired application in
the field
A
» Fig. 47 on page 44.
The application starts and the following function surfaces are displayed.
Display of functional surfaces below / above
Return to MirrorLink
®
main menu
Hide/ show the functional surfaces
▶
Turning the control knob

press.
Display of the running application
▶
In the main menu of the MirrorLink
®
- connection, press the function surface

» Fig. 47 on page 44 The last displayed application is displayed.
If you want to display a different application, then the functional surface of the
desired application must be tapped in the main menu of the Mirror link
®
con-
nection
A
» Fig. 47 on page 44.
Ending the current application
▶
Tap on the function

→

surface.
▶
Press the function surface of the desired application with the symbol

sur-
face.
By tapping the function surface Close all , all running applications are closed.
B



44
SmartLink