Operation Manual

Options for map display
Fig. 58
Map options
›
In the Navigation main menu, tap on the functional surface

surface.
The following function surfaces are displayed » Fig. 58.
2D - Two-dimensional map display
3D - Three-dimensional map display
Display of the route from the current vehicle location to the destination
Presentation of the destination or the next interim destination in the map
(depending on the menu item setting )

→ Advanced settings → Status line: )
Automatic map display in day or night mode (depending on the currently
active vehicle lighting)
Daytime map display
Night-time map display
On / off of the split screen display » page 47
On / off of the selected POI categories display » page 52, Tap map point
If the map scale of the 2D Map or 3D Map is greater than 10 km (5 miles), then
the map is automatically displayed as 2D and aligned in the direction of north.
If the scale is increased beyond this value, then the map is switched back to
the original representation.
Map scale
It is possible to change the map scale manually or to turn on the automatic
change of scale.
Symbols of the scale function surfaces
In the map area
D
» Fig. 56 on page 52 the following context-dependent
function surfaces and information is displayed.




A
B
C
D
E
 Size of the manually set map scale
 Size of the automatically set map scale
 Turn on / off the automatic change of scale
 Map view in reduced scale
 Current elevation
Manual change of scale
Map scale can be change in the following ways.
▶
Turning the control knob

.
▶
Touching the screen with two fingers and pulling them apart or closing them
together.
Enabling automatic scaling
▶
In the Navigation main menu, tap on the functional surface

→

sur-
face.
Tap on the function

is highlighted in green.
The automatic scale is only active as long as the map is centred on the vehicle
position (the function surface

or.

is hidden).
If the automatic scale is active, the map scale will change automatically de-
pending on the type of roads travelled (motorway - smaller map scale / town
larger map scale) and from the manoeuvre to be carried out.
Turn off the automatic change of scale
▶
In the Navigation main menu, tap on the functional surface

→

sur-
face.
Tap on the function

is highlighted in white.
The turning off occurs likewise when the map is moved or the map scale is
changed manually.
Map view in reduced scale
▶
In the Navigation main menu, tap on the functional surface

→

or.

→

surface.
The map scale is reduced for a few seconds and then restored.
Change map orientation
Changing map orientation is possible under the following conditions.

53
Navigation