Operation Manual
▶
Within 15 min. - route guidance is continued taking into account the calcula-
ted route.
▶
Between 15 min and 120 min - the screen displays the message
Continue route
guidance?
, after you confirm the message, the route guidance continues using
the calculated route.
▶
After 120 min - the route guidance is cancelled.
Route
Route plan
Fig. 62 Route details: a route destination / several route destinations
During route guidance, the Route plan (Information about the current route)
can be displayed.
›
In the Navigation main menu, tap on the functional surface
Tap→
route
schedule
.
A route destination
In the route plan, the following information is displayed at the destina-
tion» Fig. 62 -
.
Area with function surfaces
Destination information
Estimated time of arrival at destination / remaining driving time to desti-
nation
1)
Remaining distance to the destination
A
B
Chosen route type (economic, fastest, shortest)
Current vehicle position (address / GPS coordinates)
The display of the arrival time or the remaining driving time can be adjusted as
follows.
▶
In the Navigation main menu, tap on the functional surface
→
Advanced set-
tings
→
Time display:
surface.
Several route destinations
In the route plan, the following information is displayed at the respective des-
tinations» Fig. 62 -
.
Area with functional surfaces
Stopover (with sequential number)
Final destination
Estimated time of arrival at destination / stopover
Driving distance to destination / stopover
Substitution of destinations among themselves
Delete the destination
Continuation of the route guidance from the selected target (previous
waypoints are skipped)
Display the destination details » page 54
Insert destination into the route
▶
In the area
A
Name destination
Tap the functional surface and enter a new
destination.
▶
or: Tap on the area
A
the functional surface
destinations
and select an object
in the list of stored destinations.
Each additional destination is added to the list as the first subsequent destina-
tion route.
Change positions of destinations with each other
▶
The relevant function surface
and move the destination to the desired po-
sition.
With destinations on the route already reached the note
Dest. reached
is dis-
played below the destination name. It is not possible to change the position of
these destinations with each other.
C
D
A
1)
If the time of arrival to the final destination or remaining travelling time greater than 24 hours, is dis-
played inside the symbol.
57
Navigation