Operation Manual

ManualsBrandsSkoda ManualsMultimediaInfotainment Bolero

Telephone

Introductory information

Introduction to the subject

This chapter covers the operation of a Bluetooth

device connected to the tel-

ephone.

Depending on the Bluetooth

-profile used it is possible to connect to a tele-

phone or two phones simultaneously to the device.

If telephones are connected to the device with multiple SIM cards, then calls

can be accepted by all SIM cards of the connected telephones.

For outgoing calls, it depends on the type of connected telephone, either only

the primary SIM card or one of the other SIM cards can be selected.

The device allows you to work with text messages from the main telephone, (if

supported by the telephone).

If the device to is connected to an external device via Apple CarPlay

™

, then the

use of the Bluetooth

Connection is not possible and the phone menu is not

available.

If the device is connected to an external device via Android Auto

™

then the

connected phones and the Bluetooth

player are automatically disconnected

by connecting to external device and it connects to the device via Bluetooth

Connecting an extension phone while the timer using Android car

™

is not pos-

sible. If the Bluetooth

Feature was not turned on in external device to be con-

nected, it will be automatically switched on usingAndroid Auto

™

switched

when setting up the connection.

WARNING

The general binding country-specific regulations for operating mobile

phones in the vehicle must be observed.

Possible connection types

Depending on the number of connected Bluetooth

Devices and the connection type, the following functions are available.

The first device (main phone) The second device (additional phone)

HFP (Incoming / outgoing calls), SMS,

Phone contacts,

Bluetooth

player

HFP (incoming calls),

Bluetooth

player

Only an external device can be connected to the device as a Bluetooth

player.

Telephone

Fig. 28

Telephone: Main menu

The Telephone main menu appears when a telephone is connected to the de-

vice.

›

To display, press the



button.

If another, menu id displayed which was open last, to display the phone main

menu, press the button again



Home page - information and function surfaces » Fig. 28

Name of the telephone service provider (with active roaming, the symbol

appears before the name



)

Function surfaces of preferred contacts

Emergency number dialling or function surface of the preferred contact

» page 35, Management of preferred contacts (favourites)

Choice of storage group for the preferred contact

Display the list of paired telephones (the name of the main telephone

appears in the button)

Change the main telephone with the auxiliary telephone (the name of

the auxiliary telephone appears in the function surface)









Telephone