SIMPLY CLEVER Infotainment Navigation Columbus Owner's Manual
This Owner's Manual has been systematically designed to make it easy for you to search for and obtain the information you require. Notes WARNING The most important notes are marked with the heading WARNING. These WARNING notes draw your attention to a serious risk of accident or injury. Chapters, table of contents and subject index The text of the Owner's Manual is divided into relatively short sections which are combined into easy-to-read chapters.
Preface You have chosen a ŠKODA vehicle, which is fitted with the Infotainment Navigation Columbus (hereafter called the unit) – we thank you for your confidence in us. The new operating concept allows you to configure vehicle settings and to operate some electronic systems centrally from the unit. In addition to this Owner's Manual, please also carefully read the Vehicle Manual, because operation in accordance with these instructions is a prerequisite for proper use of the vehicle.
Navigation Table of Contents Abbreviations Familiarization with the unit Introductory information Important notes Unit overview 4 4 5 Unit operation Concerning the device screen operation Operation through the MAXI DOT display Voice control 7 7 9 13 Unit settings Setup menu 17 17 Audio/Video/Images Radio Operation Radio settings 21 21 24 Media Operation signal sources DVD video Images 26 26 29 34 35 Phone Communication Telephones and two-way radio systems Connect to the device to the mobile telep
Abbreviations Abbreviation A2DP ACC Definition PI Station identification of the RDS system, for example when setting a different radio station a software profile for the one-way audio data transfer via Bluetooth ® RDS System for the transmission of additional information for FM radio reception Adaptive cruise control TMC Definition AF Alternative frequencies for the current radio station AM Amplitude modulation - denomination of the radio frequency range TCS Abbreviation TP vCard Service fo
WARNING (Continued) Adjust the volume to ensure that acoustic signals from outside, e.g. sirens from vehicles which have the right of way, such as police, ambulance and fire brigade vehicles, can be heard at all time.
Unit overview Introduction This chapter contains information on the following subjects: Description of the unit Touch screen Switching the unit on/off Unit menus Adjusting volume First and foremost, pay attention to the safety instructions » page 4, Important notes. This chapter deals with the unit, the unit's buttons and their functions. It also covers switching the unit on and off, the main menus and adjusting the volume on the unit.
Switching the unit on/off › Press the knob to switch the device on or off. When the device is switched on, the audio source and operating mode that were active before switching off the device will be restored. If Telephone mode was active before you switched off the unit and the ignition and Bluetooth® function is not switched on, the screen displays the message » page 38. Switch on the ignition or the Bluetooth® function» page 20.
Greyed out function keys are not active. Unit operation Proximity sensors At the bottom of the device there are proximity sensors. When approaching to the screen using the hand, the device changes the display mode in the operating mode and the function keys are highlighted.
Input screen with keyboard for searching Fig. 4 Input screen for the search The numbers 1-99 indicate the quantity of matching entries that were found. If even more entries were found, ** is indicated instead of a number. If less than 6 entries were found, a list of the found entries opens automatically. Input screen with keyboard for storing information Fig. 5 Input screen for storing The input screen with keypad is used to find entries in the unit memory (e.g. phone contacts, addresses, etc.).
- Input screen in the Telephone menu » page 44. Note If the ignition and the side light are switched on, the buttons and dials on the multifunction steering wheel will also be illuminated. - Input screen in the Navigation menu » page 55 Operation through the MAXI DOT display Operate with the control lever buttons Introduction Fig.
■ Media/DVD video Name ■ Buttons and wheels of the Radio or Media menus/DVD video Button/ wheel Action Radio » Fig.
Button/ wheel » Fig. 8 Function Action Press briefly Press and hold button 6 6 a) b) c) d) e) Radio Media DVD video Return to a previous level on menu Return to Main Menu Does not apply for AUX. The sound is turned on again by pressing or turning wheel 2 . Playback of navigation announcements is not turned off. If the system plays audible messages in voice mode dialogues of the device, the volume of the audible message is affected. Context-dependent selection. Applies to DVD video.
Button/wheel » Fig.
Turn setting wheel 2 » Fig. 10 on the multifunction steering wheel to display the Last destinations menu. The menu shows the Home address menu item and a list of recent destinations. If the home address is not defined when the menu item Home address is selected, the following message appears: Please enter the home address on the infotainment system.
WARNING Please pay attention to the traffic first and foremost! As the driver you are fully responsible for road safety. Only use the system so that you are in full control of your vehicle in every traffic situation - risk of accident! ■ Do not use the voice control system when under stress or in an emergency. Your voice commands may not be recognized in such situations. The telephone connection may not be established or the connection may take too much time to complete.
Help for voice control Read and observe not recognizing a voice command on page 14 first. Start introduction When you give the voice command Start tutorial, the unit plays one of the seven parts of the voice control tutorial. Individual parts of the introduction can be called separately by the saying the voice command Introduction part ... and the number 1 through 7. Help When you give the voice command Help, the unit displays a menu containing possible context depedent voice commands.
Voice commands for the symbols in the Settings menu for map display Not in the help voice commands Read and observe Symbol on page 14 first. Voice commands to call control menus, folders and directories in each menu.
Main menu Unit settings Setup menu Fig. 12 Unit settings: Main menu Introduction This chapter contains information on the following subjects: Main menu Sound settings Screen settings Time and date settings Keyboard settings Additional keypad language settings Unit settings Voice control settings Restore factory settings Bluetooth® settings 17 18 18 19 19 19 19 20 20 20 First and foremost, pay attention to the safety instructions » page 4, Important notes.
Media Codec: ... - Media codec version Update software - Manual software update (for more information see the ŠKODA Website www.infotainment.skoda-auto.com) ■ Copyright - Information on licences and copyrights are only available in English ■ ■ Sound settings Fig. 13 Sound settings / Balance - fader settings › Press the button ■ → → Sound. Volume - Volume settings ■ Traffic report - Sets the volume for the traffic program alerts (TP) ■ Nav.
Switch off screen (in 10 seconds) - Activate/deactivate energy-saving mode for the display1) ■ Brightness: - Adjusts the brightness of the screen ■ Brightest - brightest level ■ Brighter - brighter level ■ Medium - medium level ■ Darker - darker level ■ Darkest - darkest level ■ Confirmation tone - Switch on/off confirmation tone when a function key is pressed ■ Animation when finger near screen - Switches on or off hiding of the bottom menu bar ■ Show clock in standby mode - Time and date displayed on the
Gas consumption: - Gas consumption units kg/100km - Kilograms per 100 km km/kg - Kilometres per kilogram m³/100km - Cubic metres per 100 kilometres km/m³ - Kilometres per cubic metre ■ Pressure: - Pressure units for tyre pressure ■ kPa - Kilopascal ■ bar - bar ■ psi - Pounds per square inch ■ ■ ■ ■ ■ ■ Voice control settings › Press the button → → Voice control.
Mainmenu Audio/Video/Images Radio Fig. 14 Radio: Main menu Operation Introduction This chapter contains information on the following subjects: Mainmenu List of available stations Search for radio stations and store Search available stations (Scan) Station logos Traffic programme Station information DAB) 21 22 22 23 23 23 24 First and foremost, pay attention to the safety instructions » page 4, Important notes.
Information symbols in the display Symbol Symbol Meaning Traffic information station Traffic information signals are not available or the selected station is not a traffic information station RDS function is switched off (FM) AF Alternative frequency is switched off (FM) List of available stations Meaning Signal is not available (DAB) Radio stations with picture representation (slideshow) (DAB) Update station list The station list is continually updated automatically.
You can switch between memory groups of individual preset buttons using the function keys C. Search available stations (Scan) Read and observe on page 21 first. This function plays all the receivable stations in succession for a few seconds each. Switching on › Press the menu knob 2 » Fig. 1 on page 5. or › In the radio menu, press the function key → Scan. Switching off › Press the menu knob 2 . or › press any function key in the device screen.
First and foremost, pay attention to the safety instructions » page 4, Important notes. Station information DAB) The basic setting of the radio functions is the same for all broadcast ranges. The Advanced setup menu is different for FM and DAB. The AM broadcast area does not have this menu. Fig. 16 Station information Settings › In the radio menu, press the fbutton .
RDS Regional: - Switch on/off the automatic tracking of related regional stations ■ Fixed - Maintains the selected regional station continuously. When the signal is lost, another regional station must be set manually. ■ Automatic - Auto-selects the station with the best reception at the moment. If you lose reception the region, the unit will automatically set another available region.
Media Call up the main menu › Press the button. Operation Explanation of graphic A Information for the current file (e.g.
Title / folder list Fig. 18 Track/folder list Track/folder database Fig. 19 Track/folder database Menu display › Press the function key in the menu Media . The unit is capable of classifying files according to the information in the ID3 tag file properties into the various categories of Database.
Track - Sorted by the track title Video - Files containing a video recording The scanning feature can also be cancelled by switching to another file / signal source or a function key is pressed for playback. Note In the title / folder database a maximum of 1000 files / folders can be displayed alphabetically. ■ If the file format is not supported by the unit or the file is damaged and cannot be played the title / folder database displays a struck-through icon.
signal sources Sources and file formats supported Introduction and on page 29 first. Supported signal sources This chapter contains information on the following subjects: Sources and file formats supported Requirements and restrictions Jukebox Bluetooth® player CD/DVD SD memory card USB-, AUX inputs Read and observe 29 30 30 31 31 32 33 Signal sources First and foremost, pay attention to the safety instructions » page 4, Important notes.
File properties max. 320 kb/s Bitrate Sampling max. 48 kHz rate Image resolution up to 500 x 500 pixels (200 kb) (jpg, Album covers jpeg, png, bmp, gif), depending on the availability of al(Pictures on the al- bum covers are (images on the record covers) are disbum covers) played of the respective media or from the Gracenote ® database a). a) › The remaining playback time indicated does not correspond to the actual remaining playback time for audio files with variable bitrates.
The following information is displayed: ■ ■ ■ Free: - Amount of memory used In use: - Amount of memory free Free files: - Number of files that can be imported (maximum 3000) The current memory capacity is displayed on the screen when files are being imported or deleted. Import files Supported audio/video files » page 29 can be imported from the sources currently connected into the internal memory. › Press the button → Manage Jukebox → Import. › A menu of available sources is displayed.
› Press the symbol button - the CD/DVD is ejected. SD memory card If the ejected medium is not taken out within 10 seconds, it will be retracted again for safety reasons. However, the unit will not change to the CD/DVD source. WARNING The CD/DVD player is a laser product. On the manufacturing date, this unit was classified as a class 1 laser product in accordance with the national/international standards DIN EN 60825-1: 2008-05 and DHHS Rules 21 CFR, Subchapter J classed as a class 1 laser product.
CAUTION Only use standard sizeSD cards. When using smaller SD cards with the adapter the SD memory card can fall out of the adapter while driving due to vehicle vibrations. ■ We recommend using SD memory cards of class 4 and higher. This guarantees the fastest possible access to the audio files. ■ Always store the SD cards in suitable cases to protect them from dirt, dust and other forms of damage. ■ The standard 3.5 mm stereo jack plug is used for the AUXinput.
Note The operation of the external device and its connection with other devices can be seen in the operating instructions of the respective manufacturer. CAUTION For safety reasons, the video display is switched off at speeds over 5 km/h and the following message is displayed: The vehicle is in motion. The display has been switched off for your safety. The unit continues to play the soundtrack. ■ The regional code of the player corresponds to the location of sale.
a) 14:9 - 14:9 format 47:20 - 47:20 format ■ Audio channel: - Select the audio channel from the menu displayed ■ Subtitles: - Select the subtitles from the menu displayed ■ No selection - No subtitles ■ - Select the subtitles from the DVD menu ■ ■ Button » Fig. 24 on page 34 Action Press briefly Press and hold buttona) Function Play the next video Fast video forward The longer the button is pressed, the faster the fast forward/reverse.
Supported file types Settings File type Supported formats Images jpg, jpeg, png, bmp, gif Operation Displaying images Button » Fig. 26 on page 35 a) Action Function / Press Press Press Press Press Press 2 » Fig.
WARNING The national regulations for using a mobile phone in a vehicle must be observed. ■ If a mobile phone or a two-way radio system is operated in a vehicle without an external aerial or an external aerial which has been installed incorrectly, this can increase the strength of the electromagnetic field inside the vehicle. ■ Two-way radio systems, mobile phones or mounts must not be installed on airbag covers or within the immediate deployment range of the airbags.
Introductory information Read and observe and on page 37 first. The device allows for a wireless connection to the telephone. Your telephone can be operated from the device. ŠKODA permits the operation of telephones and two-way radio systems with a professionally installed external aerial and a maximum transmission power of up to 10 watts. Please ask at a specialist workshop about installing and operating telephones and two-way radio systems that have a transmission power of more than 10 W.
Message Importance The telephone searches for available GSM networks. The telephone is not connected to the GSM network. Network search... No network The mobile phone network operator has rejected the connection (e.g. not enough mobile phone credit, SIM card blocked, roaming not available). Rejected by network. To use the Bluetooth function, please switch the ignition on. Please switch on Bluetooth. No Bluetooth devices paired.
Import contacts - Start the update of the phone book; the number of imported contacts and number of contacts stored in the phone is displayed ■ Delete other user profiles - Delete up to three previous user profiles (contacts, order of calls, call lists, speed dial buttons assigned to contacts) ■ Reminder: remember your mobile phone - Switch on/off the reminder for a connected telephone; the reminder is output when the ignition is switched off and the ignition key is removed (or the ignition is turned off an
Note Available updates for Bluetooth ® devices as well as information about the phone support can be obtained from the ŠKODA website www.infotainment.skoda-auto.com. Connect device with your telephone Read and observe on page 40 first. Pairing confirmation Depending on the telephone's Bluetooth ®, conformation is in one of the following ways. › Confirm the 6-digit PIN code 1) displayed on the device screen and the telephone display within 30 seconds on both the device and the telephone.
Depending on the telephone's Bluetooth ®, conformation is in one of the following ways. › Confirm the 6-digit PIN code 1) displayed on the device screen and the telephone display within 30 seconds on both the device and the telephone. › If required select the option in the telephone for automatically connecting the telephone to the device. Or › Enter the 4 - 16 digit PIN code into the device. › Enter the PIN code shown on the device display into the telephone within 30 seconds.
Symbol Meaning Bluetooth® players (Bluetooth®profiles A2DP and AVRCP)b) Bluetooth® player connected to the unit via Bluetooth® profiles A2DP and AVRCPb) a) b) HFP is a Bluetooth® profile that supports the functionality of the hands-free system. A2DP and AVRCP are Bluetooth® profiles that support multimedia functions.
Select assigned contact telephone number › Press the desired function key to speed dial the telephone number of a contact C » Fig. 27 on page 38. Change assigned telephone number of a contact › Press the desired function key for the speed dial C » Fig. 27 on page 38 for longer. The unit displays the telephone book. › If necessary, enter one of the contact numbers for the desired telephone contact. A screen appears to enter the telephone number » Fig. 29.
If the imported telephone book from the telephone contains more than 2000 contacts, loading is stopped and the message Contacts not completely imported. appears on the screen. Only the contacts already loaded are available, these are in the menu . Call-lists Fig. 30 Call lists The first 200 contacts along with the telephone contact data, including the picture associated with the contact, are downloaded onto the device memory 1) . If an error occurs while loading the phone book, the message Import failed.
Answer the incoming call Ignore the incoming call (mute ring tone) Reject the incoming call Contact picture1) - Display caller details Current call During a current call, the screen displays the phone number or contact name and the call duration.
WARNING (Continued) The nav. announcements provided may vary from the actual situations, e.g. due to road works or out-of-date navigation data. ■ The volume should be adjusted to ensure that acoustic signals from outside, e.g. sirens from vehicles which have the right of way, such as police, ambulance and fire brigade vehicles, can be heard at all time.
Button / Meaning Main menu Media/radio playback » page 21 Setting the navigation menu » page 48 Call up the main menu › In the Navigation main menu, press . Navigation data Read and observe and on page 47 first. Navigation data source The navigation data is part of the device and is stored in the internal device memory. Data update The navigation data should be updated at regular intervals.
Avoid routes requiring toll stickers - Switch use of routes requiring toll stickers on/off ■ Show available toll stickers - select from the list of routes requiring toll stickers for which a valid toll sticker is available ■ Map › In the Navigation main menu, press → Map.
Define home address - Display/enter/edit the home address Current position - Set the home address to the current vehicle position Address - Enter a new address » page 51.
Day/night Map display with light or dark background Split screen Switches the split screen on/off in the map » page 52 Map operation Moving the map The map can be moved in any direction by touching it with your finger and dragging it on the screen in the desired direction. Changing the scale › with the menu button 2 › by touching the screen with two fingers and pulling the fingers together or apart.
Man. - Displays the next or following navigation instructions (manoeuvres), the next POIs or an intersection detail » page 53; ■ Traffic signs - Displays traffic signs that are stored in the navigation data of the maps or that are recognised by the front camera » page 53 ■ GPS - Displays the geographical coordinates of the current vehicle location » page 54 ■ Map - Map display » page 54.
Function key a) Action Operation Press briefly Press button for a long period of timea) Plays the next track from the start Fast-forward of the track The longer the button is pressed, the faster the fast forward/reverse. Compass Fig. 34 Split screen: Compass Displayed information: › When approaching the manoeuvre area (e.g., junction), details of the naviga- tion instruction are displayed in the split screen.
GPS Fig. 37 Split screen: GPS The GPS split screen displays information on the current geographical position of the vehicle. Displayed information - Longitude1) - Latitude1) - Elevation2) Satellites: - Number of received/available satellites ■ ■ ■ ■ Map Fig. 38 Split screen: Map An additional map is displayed on the Map split screen.
Make sure that the destination has been entered correctly, for example, by checking that the destination is displayed in the map. Some names of places and other destinations can occur at several places. Navigation Enter new destination Address Introduction This chapter contains information on the following subjects: 55 55 56 Input destination possibilities Address Map First and foremost, pay attention to the safety instructions » page 4, Important notes. Input destination possibilities Fig.
› In the Navigation main menu, press → Other POIs → Options → Address. Map Some address positions are already pre-filled with the data of the last destination. The pre-filled positions can be adjusted by touching the item and then adjusting it in the input screen » page 8. To start navigation, you need to enter country, city and street. The information is entered step by step in individual input screens.
Crosshairs The crosshairs indicate the position of the pre-filled address. My destinations Drag the desired destination to the centre of the crosshairs on the map with your finger. Fig. 42 My destinations menu Touch the map with your finger to move the point of contact in the crosshair while adjusting the latitude and longitude valuesfor the entered point. The symbol displays the current map scale. This can be changed while the entry is being made » page 51.
If the preferred route type has been set, then touching the Home address will start the calculation and route guidance, or after the calculation, you need to select the route type before the route guidance starts. If the home address has not been entered, an input window is displayed with the following message: First and foremost, pay attention to the safety instructions » page 4, Important notes. Input a new POI Fig.
Search area for POIs Quick select a POI Fig. 44 Search area for POIs › In the Navigation main menu, press . Speed dial Car park Restaurant Petrol stations When you touch a menu item, a list of the nearest POIs in the selected category is displayed.
Touch 3 or 4 » Fig. 43 on page 58 to start the POI search for the selected search area. Search near the entered address or near the point entered on the map POI categories Introduction This chapter contains information on the following subjects: 60 61 61 61 61 61 Car and travel Dining and shopping Businesses and public facilities Emergencies Attractions and leisure Other destinations displayed in the map First and foremost, pay attention to the safety instructions » page 4, Important notes.
Switch display of company logos on/off.
Route calculation The route is calculated automatically according to the entered destination. The calculation takes the settings of the route options » page 48 (route type, dynamic route, etc.) into account. The route is recalculated each time if you ignore driving recommendations or change the route. This process takes only a few seconds. Nav. announcements can only then be re-transmitted.
The timing of the navigation announcement depends on the type of road and the driving speed. For example, on motorways the first announcement is made about 2000 m (6000 ft) before the location where you want to leave the motorway. Lane guidance During dynamic route guidance, the unit notifies the driver of traffic problems. If a new route is calculated due to traffic problems, the Calculating the route... announcement is sounded.
› Traffic programme TP in the FM frequency range » page 23. › Traffic programme in the DAB frequency range › TMC traffic information with a dynamic adjustment for the current route The following conditions are required for the correct TMC function: The vehicle is within reception range of the FM RDS-TMC. Adequate and uninterrupted signal reception of a traffic information station1). Current navigation data in the device.
■ ■ ■ ■ - zoom out window with described traffic obstruction - show previous traffic information - show the following traffic information - display list of all received traffic messages My tour Introduction This chapter contains information on the following subjects: New tour Tour editing Tour memory 65 65 65 First and foremost, pay attention to the safety instructions » page 4, Important notes.
n details Destination management Introduction Fig. 49 Destination details This chapter contains information on the following subjects: Stopover n details 66 66 First and foremost, pay attention to the safety instructions » page 4, Important notes. Stopover It is possible to add up to ten stopovers to the route during route guidance. The route guidance is according to the sequence of the stopovers on the route.
› by touching the menu item in the list of found POIs; › by touching the POI symbol on the map. Dial No. - Start a telephone call1) (If a telephone is connected via Bluetooth® and the destination has been entered including the contact telephone number) ■ Start - Start route calculation » page 62 ■ Store - Store the destination in the destination memory ■ In the POI details, individual POIs can be shown from the POIs found by tapping on / or by finger motion across the screen.
Selection of travel mode (Driving Mode Selection) Vehicle Vehicle systems Vehicle settings Introduction This chapter contains information on the following subjects: Selection of travel mode (Driving Mode Selection) Vehicle data Auxiliary heater and ventilation ESC-and ASR systems Tyre Assistance systems Parking and manoeuvring Light mirrors and wiper Opening and closing Seats Multifunction display Service Restore factory settings Climatronic settings 68 69 70 70 70 71 71 72 72 72 72 73 73 73 73 Firs
Engine: - Set the engine (drive) characteristics Normal - Normal Sport - Sports Eco - Economical ■ ACC: - Set the vehicle acceleration when adaptive cruise control is activated ■ Normal - Normal ■ Sport - Sports ■ Eco - Economical ■ Dynamic cornering light: - Set the characteristics of the adaptive headlights ■ Normal - Normal ■ Sport - Sports ■ Eco - Economical ■ Air conditioning: - Sets the Climatronic characteristics ■ Normal - Normal ■ Eco - Economical ■ Reset mode - Setting for all menu items in the In
Convenience consumers - Displays up to three consumers which have the largest share of fuel consumption (such as air conditioning) and displays the fuel consumption to run all convenience systems ■ Vehicle status - Displays vehicle status » Fig.
Assistance systems › Press the button Parking and manoeuvring → → Driver assistance.
Rear tone setting - Setting the pitch of the beeps for the rear obstacle detection ■ Audio lowering: - lowering the volume of the speakers (audio) ■ Off - No volume reduction of the sound from speakers ■ Weak - weak volume attenuation of sound from speakers ■ Medium - medium volume attenuation of sound from speakers ■ Strong - Strong volume attenuation of sound from speakers ■ Note The compact display of the parking aid can be switched to a full screen view by touching the screen within the display.
■ Store seat position - Store the driver's seat position and exterior mirror position in the remote control key when locking the vehicle ■ Vehicle key activated - Activate/deactivate storing the driver's seat position and exterior mirror position when locking the vehicle Multifunction display › Press the button → → Multifunction display. In this menu it is possible to hide/show the appearance of the menu items in the instrument cluster multifunction display and reset the driving data.
■ - Settings for Climatronic Air con.
C Index A ACC Additional keyboard languages Address Adjusting Volume Adjust vehicle systems ESC system Advanced settings AM Anti-theft protection Apple devices ASR Audio Media Radio Automatic distance control Automatic front window wiping in rain Automatic headlight in rain Automatic locking Automatic rear window wiping Automatic scan AUX Auxiliary heater and ventilation Settings 71 19 55 6 70 49 21 4 33 70 21 26 21 71 72 72 72 72 22 33 70 B Bluetooth Connect telephone to the device Settings Switch on/of
External input AUX USB Extra window Audio Compass Geographical coordinates GPS Manoeuvre Map Menus Navigation announcement Switching on/off Traffic Traffic signs 33 33 52 52 53 54 54 53 54 52 53 52 53 53 F 20, 73 Factory settings File formats 29 Requirements and restrictions 30 FM 21 Settings 24 Folders List Media 27 Folding down the exterior mirrors - folding in while parking 72 Frequency range See main menu 21 Front Assist 71 Fuel options 49 Function key 7 Function keys 7 G Images Display Main menu Op
Operation Playback Requirements and restrictions Scan SD memory card Select input source Settings Supported media Track list USB Voice control Memory function of the remote control key Menu Images Media Radio Setup Telephone Unit settings Video Multifunction display Multifunction steering wheel DVD video Media Navigation Radio Telephone Multimedia AUX USB Mute My destinations Menu My tour New tour Tour editing Tour memory 26 28 30 28 32 26 28 29 27 33 13 72 35 26 21 17 37 17 34 73 9 9 12 9 11 33 33 6 57 65
Emergencies Other destinations proactive passenger protection 61 61 71 R Radio Automatic scan DAB - settings FM - settings List of available stations Main menu Multifunction steering wheel Operation Preface Radio station store Search Settings Station logo Traffic programme (TP) Voice control Radio station Automatic scan Logo Search Store Radio station logo Radio station search Radio station store Route Route calculation Route guidance Route info.
Telephone conversation 45 Telephone functions 43 Tilting the mirror surface - lowering in reverse 72 Time 19 Tiredness recognition 71 TMC traffic information 63 Touch screen 5 Tour memory 65 TP (Traffic programme) 23 Traffic 63 Dynamic route 64 Information 64 64 Operation traffic information TMC 63 Traffic programme (TP) 23 traffic reports 63 Traffic reports Information 64 Operation 64 Traffic sign recognition 71 Traffic signs 51 Travel light - travel mode 72 Tyre pressure monitor 69, 70 U Unit menus Unit
ŠKODA AUTO a.s. pursues a policy of constant product and model development. We trust that you will understand that changes to models in terms of shape, equipment and engineering, may be introduced at any time. The information about appearance, performances, dimensions, weight, standards and functions of the vehicle is correct at the time of publication. Some equipment might only be introduced at a later date, or might only be offered in certain markets; information is provided by ŠKODA Partners.
www.skoda-auto.com Columbus: Octavia Infotainment anglicky 11.2014 S65.5614.03.
