Operation Manual

Fig. 74 Rear headrest: moving up/down
Read and observe on page 81 first.
Adjust front support
›
Press and hold the safety button
A
» Fig. 73.
›
Move the supports into the required position.
Adjust rear support
›
Grasp the restraint and move upwards in the direction of
1
» Fig. 74.
›
In order to push the supports downward, press the safety button
B
in the
direction of arrow
2
and hold down.
›
Press in the support in the direction of arrow
3
.
WARNING
Please note the following points about the headrest settings » page 8, Cor-
rect and safe seated position.
Note
■
The middle rear head restraint is only adjustable in two positions.
■
In sports seats, the headrests are integrated into the seat backrests and can-
not be adjusted in height.

Headrests - removing and installing
Fig. 75 Rear headrests: removing/fitting
Read and observe
on page 81 first.
Only the real head restraints may be removed or installed.
Before removing and fitting the headrests, fold the corresponding seat back-
rest forward slightly » page 87.
Removing
›
Pull the head restraint out of the seat backrest as far as the stop.
›
Press the locking button
A
in the direction of arrow
1
» Fig. 75 , while at
the same time using a flat screwdriver with a max. width of 5 mm to press
the securing button in opening
B
in the direction of arrow
2
.
›
Remove the restraint in the direction of arrow
3
.
Fitting
›
Push the support in the headrest in the direction of arrow
4
until the lock-
ing button clicks into place.
WARNING
Please note the following points about the headrest settings » page 8, Cor-
rect and safe seated position.
CAUTION
Store the head restraints that were removed in such a way that they cannot
be damaged or soiled.
Note
In sports seats, the headrests are integrated into the seat backrests and can-
not be removed.

83
Seats and head restraints